Use this section to search for a supplier of single ply membrane.
You can search by product type:
All our manufacturer members are listed A-Z below
|
Bauder Ltd
70 Landseer Road
Ipswich
Suffolk IP3 0DH
|
|
Bauder membrane products:
Thermoplan T, Thermofol
Unit 640 Avenue West
Skyline 120
Great Notley
Essex
CM77 7AA
Tel: 08451 948727
Fax: 08451 948728
|
|
Flag-Soprema’s involvement in the production of synthetic waterproofing membranes dates from 1963. Since then, it has remained at the forefront of flat roofing research and development, having developed a reputation for innovative manufacturing technology. In recent years this has resulted in the introduction of BBA certified, sustainable products such as FLAGON TPO liners, which complement the company’s range of green roof systems. Particular emphasis is placed on the quality of contracting standards and training, with only fully approved contractors being used. To comply with warranty conditions, all site work is closely monitored during installation.
|
Renolit House
Hammond Road
Elms Farm Industrial Estate
|
|
|
Renolit membrane products:
Alkorplan, Alkorflex, Alkortop, Alkortec, Alkorplus, Alkorsolar, Alkorgreen, Alkordesign, Alkorplan Metallics
|
Mannheim House
Gelders Hall Road
Shepshed
Leicestershire
LE12 9NH
Tel: 01509 505714
Fax: 01509 505475
Mr M Crook |
|
From Inspiration to Installation...........
Read more...
|
Watchmead
Welwyn Garden City
Hertfordshire
AL7 1BQ
Tel: 01707 394444
Fax: 01707 329129
Mr P Jarratt |
|
The Sika-Trocal Roofing Division of Sika Ltd provides flat roofing membranes for the new build and refurbishment markets. Trocal was first established in Great Britain in 1972 and acquired by the Sika Group in 2001. Throughout its history the company has maintained high standards of training and quality installation, building a loyal specialist sub contractor, specifier and client base. Today Sika-Trocal provides high levels of specification generation, site support, straightforward guarantees and quality in construction, making Sika-Trocal the contractorÙs choice.
PRODUCT TYPE
PVC -p- Polyvinyl chloride. A flexible form of PVC due to the addition of high molecular weight plasticizers, which can be heat or solvent welded (depending upon the product). PVC-p-based membranes are generally not suitable for direct contact with bitumen unless a suitable weight of fleece backing is incorporated to separate the two.
FPO - Flexible Polyolefin. FPO is a large family of heat-weldable polyolefin based upon polyethylene or polypropylene. Preparation of the lap prior to welding may be required. FPO-based membranes are generally suitable for direct contact with aged bitumen.
TPE - Thermoplastic Polyolefin Elastomer. A particular group of polyolefins with the basic properties of elastomers but which can be processed as thermoplasts. They exhibit a high resistance to UV /Ozone exposure and do not absorb moisture. Laps are heat welded without production of fumes or smoke. The wide temperature range for welding enables secure welding of seams in differing climatic conditions.
CPE - Chlorinated polyethylene. Polyethylene is made flexible by chlorination and can be heat or solvent welded. Generally, CPE is compatible with bitumen.
EPDM - Ethylene Propylene Diene Terpolymer. EPDM is a naturally flexible material to which carbon black is added for stability. Jointing is normally carried out with tape bonding using a special primer but adhesives can also be used. EPDM is compatible with bitumen. Generally FPO based membranes can be recycled back into themselves or into another product.
PIB - Polyisobutylene. PIB incorporates carbon black to provide good physical properties. PIB products available on the UK market are generally solvent welded using tape systems. and are compatible with bitumen.
VET - Vinyl ethylene terpolymer. VET consists of PVC made flexible by blending with Ethylene Vinyl Acetate (EVA). VET can be heat or solvent welded and is compatible with bitumen.
membrane manufacturer members
